UK Supplier of Data Acquisition & Thermal Imaging systems, software and services

Expert Vibro

Manufacturer: Delphin Technology AG

 

Vibration measurement with state of the art processor technology

Expert Vibro is Delphin Technology's new device for acquiring transient signals and vibrations. The latest processor technology enables up to 16 synchronous channels to be processed at high sampling rates while requiring minimal space. 24-Bit A/D converters ensure high precision. Users may switch between voltage measurement, IEPE or shaft vibration sensors. Integrated comparators and digital inputs allow flexible triggering. Measurement data is monitored "on the fly" with digital outputs being switched within msecs in the event of a limit value violation.

Fully equipped –  compact design

  • 4 / 8 / 12 / 16 vibration inputs capable of being individually triggered
  • 50 KHz sampling rate per channel (∑ 800 KHz)
  • 15 GB data logger memory
  • 4 digital inputs for frequency measurement of up to 1 MHz
  • 4 analog outputs for monitoring purposes
  • Convenient DIN rail-mounting
  • Display capable of on-site graphic portrayal
Applications
  • Vibration Monitoring
  • Industrial Monitoring

User friendly configuration

Vibration measurement with Expert Vibro is user friendly. Intuitive configuration means fast installation and short training times. All relevant characteristic values are obtained from spectra and time signals. Spectra are calculated online and saved independently with time signals and characteristic values. Versatile software channels enable the Expert Vibro to perform complex analysis and monito- ring tasks. The Expert Vibro's touch screen can display configuration or measurement data.

A range of interfaces

Expert Vibro can be connected via LAN to the intranet/inter- net and via USB to PCs. For standalone applications, integrated Wi-Fi, UMTS or LTE modules are optionally available. Connection is via an antenna at the SMA connectors. In addition to two PROFIBUS interfaces, Modbus TCP is available to users for fieldbus connections. Multiple Expert Vibro devices can be synchronized with each other.

Universal sensor connection

  • Analog inputs switchable via software
  • Eddy current sensors
  • Acceleration sensors
  • Velocity sensors
  • mV / mA signals (pressure, etc.)
  • Selectable IEPE feeds
  • Integrated comparators for Keyphasor® sensors
  • Measuring range to ± 25V
  • Plug-in screw terminals

 

EXPERT Vibro Channel Types

Applications

  • Shaft vibration monitoring and analysis
  • Bearing damage diagnostics
  • Combustion chamber vibration monitoring
  • Gear box analysis
  • Housing vibrations
  • Mobile vibration measurement

Local and decentralized interfaces

  • Interfaces to PC
  • LAN interface (Modbus TCP)
  • USB host for data read out
  • Field bus interfaces
  • 2 x PROFIBUS DPV1 slave (redundant)
  • 3 x serial interface (Modbus RTU)
  • 2 x CAN interfaces
  • Remote monitoring
  • Optional Wi-Fi
  • GSM / UMTS / LTE optional

Monitoring and online analysis in a single device

  • Fast limit value monitoring of time signals
  • Monitoring of characteristic values
  • Online transfer of measurement data
  • Spectrum – online – up to 12,800 lines (FFT)
  • Versatile characteristics (characteristic values for phase, frequency and amplitude)
  • Accounting and statistics function
  • Integration functions (two-stage)

Delphin Expert Vibro Connectivity

 

Analog inputs4, 8, 12, 16
Sampling rate per channel20Hz to 50KHz
Usable signal rangeDC to 20KHz
Voltage / current range± 25V / 10-20mA / 4-20mA / free
Signal conditioning, software selectableNone, AC coupling, IEPE
Resolution / input impedance24bit / 4Mohm
Dielectric withstand voltage± 100VDC
Galvanic Isolation / channel to channel / channel to system± 400VDC
Digital Inputs4
Input signallow: 0-2V / high: 5-50VDC @3.5mA
Galvanic isolationYes, 2.5 KVDC
Max. input frequency / min. pulse width1MHz, 500nS
Analog outputs4
Resolution16bit
Output range0-10V / ±10V / 0-20mA / 4-20mA
Galvanic isolation± 400V
Min. load / max. load650ohm
Digital outputs8
Switching voltage / current / PWM50V / 0.6A / galvantically isolated / 5Hz - 10KHz, to 1:500
Data storage 
Max. size / measurement values15GB / 4 billion measurement values
Signal conditioning functions 
High-pass / low-pass / band-pass 
Cut-off frequency / filter ordering / filter characteristics5 - 20KHz / 4, 6, 8, 10 / incl. Butterworth
Intergrator / DiffentiationSignle or Double intergrator / differentiation
FFT 
Line number / window function / averagingMax. 12800 lines / von Hann, Hanning, Flat-top / 2 - 32 times
FFT typesNarrow band / wide band, envelope / demodulation, amplitude / phase spectra
Characteristic values from time signalMax / Min value, peak-to-peak value, arith. average, TRMS, max vect. sum, local min / max values
Characteristic values from frequency spectrumAmplitude, frequency, main oscillation phase, any harmonic amplitude, frequency, sum value, quadratic mean (in any frequency band), sum or remainder value
Characteristic values on digital input 
Frequency1Hz - 1MHz
Counter32bit, Up-Down counter, quadrant decoder
Interfaces 
Physical equipment COM1 / COM2RS485, 9-pole sub D plug, DIN EN ISO 19245-1
Physical equipment COM3RS232, 9-pole sub D plug
 LAN1 x 1000 Base-TX, 1 x 100 Base-TX
WLAN / WWAN802.11b/g/n / GPRS, UMTS, LTE
USBDevice 2.0 / host 2.0 / low / high / full
PROFIBUS2 x PROFIBUS DPV1 / Slave max. 12Mbit, inc. redundancy
CAN / RS232 / RS4852 x CAN 2.0 / Modbus RTU, SCPI, ASCII
TCP/IPModbus TCP
General technical information 
Dimensions / weight210 x 80 x 125mm / 750g
FixingRail mounting DIN EN 60715 or screw fixing
Signal connections Plug-in screw terminals, 96 terminals in 2 rows, max 1.5mm2
Temperature range-20 to 60°C
Power supply / power input12-24VDC / ±10% ca. 20 Watt

Complete system
ProfiSignal is a complete software system for data acquisition, analysis, visualisation and automation. The software is very user-friendly and combines professional functionality with easy operation. ProfiSignal provides a clear and logical overview of all measurement systems: whether for single or multi-thousand channel applications. For new users, ProfiSignal is quick to learn. ProfiSignal is modular, scalable and available in three versions: Go, Basic and Klicks. Each version has backward compatibility for operability, data files and application projects.

Measurement Database Included
Measurment hardware configuration takes place with the DataService / Configurator software included in ProfiSignal. The software configures hardware and software interfaces and records data securely and permanently.
The DataService saves measurement data to a database. Any ProfiSignal version on the network can then access these databases and immediately display their data as trends.

  • Confgures hardware
  • Records data to data files
  • Records data to databases
  • Calculation functions
  • Monitoring functions
  • Event Alarms (e-mail, text message, fax)
  • User management and password protection systems
  • Standard software interfaces (OPC, Modbus ...)
  • Customized software interfaces (OCX, .NET ...)

Overview of software modules

ProfiSignal GO

ProfiSignal GO is a runtime system enabling measurment data to be displayed and analyzed in just three steps. The GO version is able to analyze large volumes of offline and online data.
  • Data acquisition and recording
  • Data analysis and calculations
  • Online and offline trends
  • Data export and print outs
ProfiSignal Basic

ProfiSignal Basic, like ProfiSignal Klicks, is a developmental system for generating custom systems with visualization and trend functions

  • Operation and observation
  • Process visualization
  • Report generation
ProfiSignal Klicks

ProfiSignal Klicks is software for test automation and the programming of control systems

  • Automating test stands and process control systems
  • Automating evaluation and analysis functions
  • Generating parameter graphs
  • Selective frequency band evaluation

Attachments

Ask about this product